bonomarzo.info

Photosynthesis takes place in what part of the plant

Закрыть ... [X]

Photochemical reaction, a initiated by the absorption of in the form of . The consequence of ’ absorbing light is the creation of whose chemical and physical properties differ greatly from the original molecules. These new chemical species can fall apart, change to new structures, combine with each other or other molecules, or transfer , , , or their electronic energy to other molecules. Excited states are stronger and stronger reductants than the original .

It is this last property that is crucial in the most important of all photochemical processes, , upon which almost all on depends. Through photosynthesis, convert the energy of sunlight into stored by forming from atmospheric and and releasing molecular as a byproduct. Both carbohydrates and oxygen are needed to sustain animal life. Many other processes in nature are photochemical. The ability to the world starts with a photochemical reaction in the , in which retinal, a molecule in the photoreceptor cell , isomerizes (or changes shape) about a double bond after absorbing light. , essential for normal and development and function, is formed in the skin of animals after exposure of the chemical 7-dehydrocholesterol to sunlight. protects Earth’s surface from intense, deep , which is damaging to and is formed in the by a photochemical dissociation (separation) of molecular oxygen (O2) into individual oxygen atoms, followed by subsequent reaction of those oxygen atoms with molecular oxygen to produce ozone (O3). that does get through the ozone layer photochemically damages DNA, which in turn introduces on its replication that can lead to .

ozone depletionozone depletionAntarctic ozone hole, September 17, 2001.NASA/Goddard Space Flight Center

Photochemical reactions and the properties of excited states are also critical in many commercial processes and devices. and are both based upon photochemical processes, while the manufacture of chips or the preparation of masks for printing relies on UV light to destroy molecules in selected regions of masks.

The sequence of operations in making one type of integrated circuit, or microchip, called an n-channel (containing free electrons) metal-oxide semiconductor transistor. First, a clean p-type (containing positively charged “holes”) silicon wafer is oxidized to produce a thin layer of silicon dioxide and is coated with a radiation-sensitive film called a resist (a). The wafer is masked by lithography to expose it selectively to ultraviolet light, which causes the resist to become soluble (b). Light-exposed areas are dissolved, exposing parts of the silicon dioxide layer, which are removed by an etching process (c). The remaining resist material is removed in a liquid bath. The areas of silicon exposed by the etching process are changed from p-type (pink) to n-type (yellow) by exposure to either arsenic or phosphorus vapour at high temperatures (d). Areas covered by silicon dioxide remain p-type. The silicon dioxide is removed (e), and the wafer is oxidized again (f). An opening is etched down to the p-type silicon, using a reverse mask with the lithography-etching process (g). Another oxidation cycle forms a thin layer of silicon dioxide on the p-type region of the wafer (h). Windows are etched in the n-type silicon areas in preparation for metal deposits (i). The sequence of operations in making one type of integrated circuit, or microchip, called an n-channel (containing free electrons) metal-oxide semiconductor transistor. First, a clean p-type (containing positively charged “holes”) silicon wafer is oxidized to produce a thin layer of silicon dioxide and is coated with a radiation-sensitive film called a resist (a). The wafer is masked by lithography to expose it selectively to ultraviolet light, which causes the resist to become soluble (b). Light-exposed areas are dissolved, exposing parts of the silicon dioxide layer, which are removed by an etching process (c). The remaining resist material is removed in a liquid bath. The areas of silicon exposed by the etching process are changed from p-type (pink) to n-type (yellow) by exposure to either arsenic or phosphorus vapour at high temperatures (d). Areas covered by silicon dioxide remain p-type. The silicon dioxide is removed (e), and the wafer is oxidized again (f). An opening is etched down to the p-type silicon, using a reverse mask with the lithography-etching process (g). Another oxidation cycle forms a thin layer of silicon dioxide on the p-type region of the wafer (h). Windows are etched in the n-type silicon areas in preparation for metal deposits (i).Encyclopædia Britannica, Inc.

Read More on This Topic

Figure 2: A “best guess” reconstruction of the abundance of O2 in the Earth's atmosphere as a function of time. The O2-abundance axis is logarithmic.

evolution of the atmosphere: Photochemical reactions

Sunlight can provide the energy required to drive chemical reactions that consume some gases. Due to a rapid and efficient photochemical consumption of methane (CH4) and ammonia (NH3), a methane–ammonia atmosphere, for example, would have a maximum lifetime of about one million years.…

History

The use of photochemistry by humans began in the late by 1500 bce when Canaanite peoples settled the eastern coastline of the Mediterranean. They prepared a purple fast (now called 6,6’-dibromoindigotin) from a local , using a photochemical reaction, and its use was later mentioned in documents that described earlier times, such as the epics of and the Pentateuch. In fact, the word may mean “reddish purple.” This dye, known as , was later used to colour the cloaks of the Roman Caesars.

In the simplest photochemical process, s can emit light in the form of fluorescence or . In 1565, while investigating a Mexican wood that relieved the excruciating pain of urinary stones, Spanish physician Nicolás Monardes made an aqueous (water-based) extract of the wood, which glowed blue when exposed to sunlight. In 1853 English physicist noticed that a solution exposed to a flash gave off a brief blue glow, which he called . Stokes realized that lightning gave off energy in the form of UV light. The quinine absorbed this energy and then reemitted it as less-energetic blue radiation. (Tonic water also glows blue because of quinine, which is added to provide a bitter taste.)

In the 16th century Florentine sculptor recognized that a exposed to sunlight and then placed into the shade gave off a blue glow that lasted for many seconds. This process is called phosphorescence and is distinguished from by the length of time it persists. inorganic were prepared in 1603 by cobbler-alchemist of Bologna by reducing the natural mineral sulfate with to synthesize sulfide. Exposure to sunlight caused the phosphor to emit a long-lived yellow glow, and it was sufficiently regarded that many traveled to Bologna to collect the mineral (called ) and make their own phosphor. Subsequent work by Italian astronomer in 1652 demonstrated that the is emitted at longer wavelengths than needed to excite the phosphor; for instance, blue phosphorescence follows UV excitation in diamonds. In addition, in 1728 Italian physicist Francesco Zanotti showed that phosphorescence keeps the same colour even when the colour of the excitation radiation is altered to increasing energy. These same properties are also true of fluorescence.

The modern era of organic photochemistry began in 1866, when Russian chemist Carl Julius von Fritzche discovered that a concentrated solution exposed to would fall from the solution as a precipitate. This precipitation happens because the anthracene molecules join together in pairs, or dimers, which are no longer soluble.

In the 19th and early 20th centuries, scientists developed a fundamental understanding of the basis for and phosphorescence. The foundation was the realization that the materials (dyes and phosphors) must have the capability of absorbing optical radiation (the ). German chemist and English chemist demonstrated in 1859 that the amount of fluorescence or phosphorescence was determined by the total amount of optical radiation absorbed and not the energy content (i.e., the wavelength, colour, or frequency) of the radiation. In 1908 German physicist realized that absorption of radiation was a consequence of a , and this was further extended by German physicist in 1912 to include the —the introduced to the molecule by absorption must be equal to the total of the energies of each individual process of energy . in the previous sentence is the , also called the Stark-Einstein law, which states that a single molecule may absorb exactly one of light. The amount of energy absorbed by a substance is the product of the number of photons absorbed and the energy of each photon, but it is the radiation intensity and the number of absorbed photons per second, and not their energy, that determine the extent of photochemical processes.

The contemporary description of the absorption of optical radiation involves promotion of an electron from a low-energy to a more energetic orbital. This is synonymous with saying that the molecule (or atom) is promoted from its (or lowest energy state) to an (or higher energy state). This excited-state molecule often has drastically different properties from the ground-state molecule. In addition, a molecule’s excited state is short-lived because a sequence of events will either return it to its original ground state or form a new chemical species that will eventually reach its own ground state.

Consequences of photoexcitation

The chemical nature of a is primarily described by the behaviour of its . An important facet of is that the total energy of a molecule’s electrons (its electronic energy) can take on only certain distinct values; the energy is said to be quantized. Each distinct energy corresponds to an electronic state of the molecule. Electronic states are described by a series of numbers that specify the orbital each electron is in and the “” of each electron. The electron’s spin, which does not literally correspond to rotation, has only two possible values—referred to as up and down. Each can contain only one electron of each spin; this is called the . If every occupied (or electron-containing) orbital holds a pair of electrons with opposing spin, the molecule is in a , which is the pattern for the of most molecules. When the molecule is excited (e.g., by absorption of a ), one electron is promoted to a previously unoccupied orbital, and, if its spin does not change, then the two (now unpaired) electrons still have opposing spin and the molecule is still in a singlet state. However, occasionally an electron’s spin will flip when it is excited such that the two unpaired electrons now have parallel spins and the molecule is in a . A change in intrinsic electron spin is not very probable, so conversion of a molecule from singlet to triplet or vice versa is slow compared with other molecular processes.

The internal energy absorbed from the exciting radiation is lost by either a radiative ( or ) or a nonradiative process. The nonradiative processes are internal conversion, which involves electronic states of the same electron spin, , which involves states of different electron spin, or .

It is worth noting that, in addition to electrons, the behaviour of the nuclei is also important in describing the behaviour of the molecule. of the nuclei relative to each other are usually described as , and, just as with electronic energy, the total vibrational energy in a molecule is quantized. However, the vibrational states of a molecule are spaced much more closely than the electronic states. Thus, the total energy of a molecule is coarsely defined by its electronic state and more finely by its vibrational state. Other types of energy with even more finely spaced states exist but are not discussed here.

explains internal conversion as a transfer of excess electronic energy into excess vibrational energy of a lower electronic state, followed by dissipation of the vibrational energy into the surroundings as heat. The higher excited (S2, S3, and so on, often generally denoted Sn) internally convert rapidly to S1, the excited state with the lowest energy. Internal conversion from S1 to S0, the lowest-energy (or ground) state, is much slower, allowing time for the molecule to either emit a (), intersystem cross to a that rapidly internally converts to T1 (the lowest-energy triplet state), or undergo a chemical reaction. The T1 level can internally convert to S0, emit a photon (), or take part in a . This method of accessing the triplet states ( from S1) is the most common, though they can also be reached through an extremely weak (that is, improbable) absorption from the ground state directly to the triplets. Because the unpaired electrons of states (with parallel spins) interact more strongly than those of (with opposing spins), the energy difference T1 − S0 is less than S1 − S0, and occurs at longer wavelengths than . Also, the low probability of a spin change results in the long-lived nature of observed by in 1568 or in glow-in-the-dark products common today. Because internal conversion is rapid, fluorescence usually occurs only from S1 (this is called Kasha’s rule), though a small number of molecules are known that emit from their S2 (azulene) or S3 (pentalene) states.

Both singlet and triplet are distinct in nature and have completely new properties, including bond length and conformation (molecular geometry or shape), among others. Because the electrons have a much smaller mass than the nuclei, absorption of light involves an almost instantaneous change in the , while the nuclei initially remain in their ground-state positions. Relaxation of the nuclei toward their new excited-state positions lowers the total energy. This relaxation, called the , is why fluorescence emits with a lower energy than the original absorption. It is notable that this relaxation occurs within a single electronic state and so applies when both the absorption and fluorescence involve the S1 and S0 states.

The of luminescence, either fluorescence or phosphorescence, is the fraction of the absorbed radiation that appears as that luminescence. Quantum yields are less than 100 percent owing to nonradiative processes (e.g., internal conversion) that dissipate the excess internal energy acquired from the absorbed photon. This energy appears as heat.

All these events take place over a wide variety of times, most of which are extraordinarily fast by human standards. Internal conversion and transfer of excess vibrational energy to the surroundings occur in 30–300 femtoseconds (fs; 1 fs is 10−15 second). The S1 state typically exists for 1–100 nanoseconds (ns; 1 ns is 10−9 second), but if photochemistry occurs, it can exist for less than 100 fs. Intersystem crossing (from S1 to Tn) occurs in 100 picoseconds (ps; 1 ps is 10−12 second) to 100 ns. The T1 state, in contrast, radiates in 1 millisecond (ms; 1 ms is 1/1,000 second) to 10 seconds, or even longer in extreme cases.

Unraveling all these processes requires observing the evolution of absorption and spectra over time. The excited and may also absorb radiation and reach higher excited electronic levels. In general, this transient absorption spectrum is different from the absorption of the ground state, which allows monitoring of the time evolution of the excited states. This is accomplished by a sequence of optical pulses: first an intense radiation pulse that creates an excited singlet state and, after a delay, a second, weaker pulse at a different wavelength, or range of wavelengths, that probes the transient absorption. Early experiments of this type were pioneered in the late 1940s by English chemists and , who were awarded the for Chemistry in 1967. Called , these experiments used to provide short (millisecond to microsecond) pulses of light and were often used to study photolysis (see below ). Modern experimentalists study all types of photochemical reactions by using , which allow measurements to be made with a time resolution as short as 10 fs. In addition to corresponding methods used with fluorescence and phosphorescence, modern techniques sometimes use several light pulses to obtain more detailed information about the excited states of molecules and their interaction with the surrounding or solvent.

Luminescence is the of light by certain materials when they are relatively cool. Examples of luminescence are found in both natural and man-made systems. give off a green glow from fluorescence of a protein called (GFP), which is excited through a chemical reaction (see below ). The gene sequence for GFP can be inserted into the of an organism and thereby confer a new property, the ability to emit green fluorescence. For instance, the GFP can be inserted into DNA to the gene for cancerous liver cells. Such a mouse radiates green fluorescence from its . Proteins similar to GFP have been found in that emit blue, yellow, and red fluorescence, offering a rich colour palette for exploring the functioning of cells.

Hevesy, Georg Charles vonHevesy, Georg Charles vonLearn how Georg Charles von Hevesy developed the technology to see inside veins and organs and how he confounded the Nazis' search for gold in Denmark.© American Chemical Society

There are many industrial needs for luminescence. Engineers measure the air pressure at all points over the surface of a model of a wing by using a phosphorescent . The phosphors in the paint are excited and eventually reach their T1 states, from which they can phosphoresce and be observed. In areas of high pressure, in the paint accepts the T1 electronic energy from the excited paint molecules (see below ), shortening their lifetime and reducing the amount of phosphorescence. The lifetime of the phosphorescent molecules is longer in areas of because there is less oxygen in the paint. Use of this special paint eliminates the need for the laborious installation of pressure sensors and is also used by the automotive and airline industries.

uses phosphors for display screens. By combining all possible mixtures of metal , a vast array of different coloured phosphors is created. Fluorophores are added to and washing powder to the appearance of whiteness by absorbing UV light and then fluorescing blue.

When a second molecule is located near an electronically excited molecule, the can be transferred from one to the other through space. If the second molecule is chemically different, there can be a substantial change in the luminescence. For example, the chemiluminescence of a jellyfish is actually blue, but, because the energy is transferred to GFP, the observed fluorescence is green.

Photosensitized molecular oxygen is a powerfully oxidative species that severely hampers the photosynthetic of and causes health problems such as in humans. The of molecular oxygen is very unusual in that it is a ; hence, it can accept electronic energy from more-energetic triplet states of other molecules in a process called quenching (as in the case of the space shuttle wing described above). When this occurs, the donor molecule begins in its triplet state and undergoes a change in spin to its . The molecular oxygen begins in its triplet ground state and also changes spin to a singlet excited state. Because the total spin between the two molecules is unchanged, the transfer of energy can occur rapidly and efficiently. The resulting molecular oxygen singlet state phosphoresces in the far red and the near infrared. Moreover, it is both a strong oxidant and peroxidant and, if formed, may chemically attack (oxidize) a nearby molecule, often the same molecule that sensitized the molecular oxygen. The reaction often changes the molecule to a form without colour. This light-induced bleaching (one kind of photodamage) can be observed in nearly any coloured material left in sunlight. In fact, the photosynthetic systems in plants must be continuously dismantled, repaired, and rebuilt because of photodamage (primarily from singlet molecular oxygen).

Some organisms use photodamage to their advantage. A remarkably effective plant-pathogenic , , produces a that efficiently sensitizes singlet molecular oxygen. Peroxidation of the plant cell causes the of the infected plants to burst, giving nutrients to the fungus.

Chemical reactions can leave a molecule with enough internal energy to produce and , called chemiluminescence. Deep-sea explorers remark on the eerie red glow in the gloom of the ocean abyss given off by volcanic vents called “black smokers.” This is phosphorescence from singlet molecular oxygen excited by a chemical reaction with in seawater. A familiar example is the glow sticks that are popular at nighttime entertainments.

Many living organisms give off a chemiluminescence, which is often called . A familiar example is the yellow flash of a . In the firefly the luciferin is converted by the enzyme luciferase into an . The newly formed intermediate spontaneously degrades into oxyluciferin and carbon dioxide while emitting a photon of light. Other examples of bioluminescence include the yellow glow of the ocean waves at night from marine and the South American , which has a female larval form with a red bioluminescent glow at its head and a series of green glowing spots along its body.

Photoprotection

Photoprotection involves the nonradiative dissipation of excess electronic energy to avoid damaging chemical processes from the . The simplest example is a molecule (such as a ) that has highly efficient internal conversion so that the other competing processes (fluorescence, , and photochemistry) are negligible. The absorbed energy is simply dissipated as heat.

In , absorption of yields an excited singlet state on one base of the DNA. This excited base can undergo a chemical reaction, called 2 + 2 cyclophotoaddition, with a nearby base that fuses the two together into a dimer. It is a remarkable aspect of the right-handed helical conformation of DNA that this photodimer does not cause dramatic changes in the shape of the helix. However, this defect in the DNA strand may eventually lead to a and induce cancer or cell death (apoptosis). Fortunately, rapid internal conversion is an property of the heterocyclic bases that make up DNA and is the primary basis for protection of DNA against damage. In addition, when is exposed to intense optical radiation, organelles called melanocytes begin to multiply and migrate and also begin the synthesis of granules that darken the skin and reduce the amount of UV light reaching the underlying DNA.

Perhaps the most ubiquitous photoprotectants in nature are the . They provide essential protection to all known photosynthetic organisms, as well as to the of animals. Carotenoids make ideal photoprotectant molecules because they possess rapid internal conversion from all states, including from S1 to S0 (1–100 ps, depending on the carotenoid), and because fluorescence from their S1 states is not allowed. Thus, all possible outlets for electronic excitation are effectively shut off except for dissipation of the energy as heat.

More critical is the fact that the T1 energy of all biologically important carotenoids, such as beta-carotene, lies below the S1 energy of molecular oxygen. Thus, carotenoids are unable to sensitize molecular oxygen and actually quench it, dissipating the energy safely as heat and leaving harmless ground-state molecular oxygen. This also protects animals and plants from singlet molecular oxygen generated during biological processes and is the reason for the large medical interest in carotenoids. In addition, carotenoids quench other molecules in their T1 states, preventing the formation of singlet molecular oxygen. This explains the vast quantity of carotenoids found in photosynthetic systems and in the retina, where continuous photoexcitation unavoidably generates of .

A commercial example of the need for photoprotection is the yellowing of wood and paper due to sunlight. Paper contains the chemical . A photoreaction converts a lignin derivative into a benzofuran, which gives a yellow coloration.

One type of photochemical reaction is the . Since it is the electrons that provide the bonding forces that hold atoms together into molecules, if the distribution of electrons within a molecule changes drastically, the bonding forces may also change. In photodissociation, also called photolysis, the absorption of light raises the molecule into an in which one of the no longer exists. Thus, absorption of light causes cleavage of a chemical bond and the release of two fragments called because they each have enough electrons to form half of a chemical bond and are generally quite reactive.

The most prevalent example of photodissociation involves molecular oxygen in the . Even though the molecular oxygen absorption between 180 and 240 nanometres (nm; 1 nm is 10−9 metre) is extremely weak, it is able to drive this process because of the large amount of molecular oxygen in the stratosphere and the many s in this region of the solar spectrum. In the reaction, molecular oxygen is fragmented into two oxygen atom , which react with other oxygen molecules to form . This ozone the , which absorbs photons strongly at 180–280 nm, thereby protecting organisms on the surface of Earth from most of the damaging UV light from the .

Schematic view of ozone chemistry in a pure oxygen environment. Ultraviolet light is represented by hν. Schematic view of ozone chemistry in a pure oxygen environment. Ultraviolet light is represented by hν.Encyclopædia Britannica, Inc.

In photoisomerization no chemical bonds are broken, but the molecule changes shape. For example, absorption of optical radiation by a stilbene molecule converts the central double bond from trans to cis. As in photodissociation, this is caused by the electron distribution in the being quite different from that in the ; hence, the structure of the initially created excited singlet (by absorption of light) is most stable at 90°, or halfway between the cis and trans forms. The molecule attempts to adopt this conformation by rotating about the double bond until the shape of its nuclei matches the distribution of its electrons. Internal conversion occurs most efficiently from this point where the S0 and S1 energies are close. Thus, within one or a few molecular vibrations (30–100 fs), the molecule returns to the S0 state with excess vibrational energy. However, the 90° twist of the double bond is the least-stable conformation for the electron distribution of the S0 state, so the molecule again rotates about the double bond. Rotation can either continue in the same direction, forming the new , or go back, forming the original isomer. In reality the motions of the molecule are more complicated than described here, involving simultaneous rotation about multiple bonds. However, this simple description contains the essence of the process.

The primary step in is the photoisomerization of a retinol () molecule bound within a specialized protein (). The (e.g., ) and the protein together one of a large family of membrane-bound photoreceptors, or . These protein-pigment complexes are responsible for all of the body’s responses to light, including vision, growth and division of melanocytes (tanning), regulation of circadian rhythms (the body’s 24-hour cycle), opening and closing of the , and others. The active centre of rhodopsin is found in cells of the . The retinal molecule has several conjugated double bonds, which are all trans except for one in the cis conformation. This single cis bond photoisomerizes rapidly and efficiently to trans, driving a change in the protein structure that then initiates a cascade of events leading eventually to a nerve impulse.

Rod cells are the most sensitive to light, but all absorb at the same wavelength, which does not allow colours to be distinguished. In contrast, there are three types of cells, each containing a different rhodopsin that absorbs at a slightly different wavelength, enabling . Remarkably, all cones and rods contain the same retinal ; small differences in the protein shift the rhodopsin absorption (the energy difference between S1 and S0) to different colours. In fact, all known animal photoreceptors use as their chromophore. It absorbs light strongly, and, when incorporated into protein, its absorption matches the solar spectrum closely, so it is sensitive in very low light. Also, it is quite stable, so spontaneous , which would cause false images, almost never occurs. The structural change in the protein upon isomerization is quite large.

Structure of the retina Structure of the retinaEncyclopædia Britannica, Inc.

Photorearrangement

In photorearrangement, absorption of light causes a its structure in such a way that atoms are lost and it becomes another chemical species. One biologically important photorearrangement reaction is the conversion of to in the . Lack of exposure to can cause a , which leads to a debilitating decalcification of the called . This disorder was first described by Roman physicians in the 2nd century bce, and, at the height of the , it affected 90 percent of children raised in the crowded cities of Europe and . Early in the 19th century it was recognized that rickets could be prevented by exposure to sunlight, and this practice became widely adopted at the beginning of the 20th century as an effective treatment.

Plants in the human diet contribute 7-dehydrocholesterol, which accumulates in -rich rafts in the plasma membrane of skin cells. While in the skin, 7-dehydrocholesterol absorbs light (about 300 nm), leading to the photorearrangement. In this reaction the bond between one and one atom is eliminated, while simultaneously the same hydrogen atom forms a bond to a new carbon atom, resulting in the molecule , or vitamin D3.

Though it is not biologically active itself, cholecalciferol is converted by the and the into several forms of with various metabolic roles, including regulating calcium (Ca2+) levels in the , kidney, liver, and bone and controlling differentiation of hematopoetic cells in to macrophages and for . It is also an antiproliferative agent for and , , and .

The energy in from the that reaches the surface of Earth is stored as energy-rich chemicals (such as ) by green , , and certain . Most on Earth derives its nutrition from this photochemical process called photosynthesis, in which over 3 × 1011 metric tons of are changed into each year. The engine that drives this process is a complex of and , the photosynthetic unit, arranged into an apparatus within a . In this cellular machine is a reaction centre that contains the natural pigments and . Light is absorbed, and the resulting singlet excitation energy is directed to reach a special pair of chlorophyll situated in the reaction centre, which is very close to one side of the membrane. The excited singlet of the chlorophyll pair is a strong reductant and transfers an (in what is called a charge-transfer reaction) to an adjacent pigment molecule to create a pigment (a negatively charged ion) and chlorophyll pair (a positively charged ion). The reaction centre is beautifully designed so that the electron continues to move from pigment to pigment, always farther from the chlorophyll pair, until it reaches a transport molecule called a , located at the opposite side of the membrane. The quinone returns the electron back across the membrane but takes a (H+) along with it. This transport of H+ across the membrane happens again and again, always in the same direction, creating an abundance of hydrogen ions on one side of the membrane and a shortage on the other. The final result is that light energy is converted to a difference in across the membrane; this difference is stored electrical energy, somewhat to a . Further photosynthetic processes, which do not require sunlight, use this energy to generate the high-energy chemical species that sustain the plant, as well as those organisms that consume it.

Though the reaction centre is wonderfully efficient at converting electronic excitation into stored electrical energy, it is not effective at absorbing sunlight. Thus, surrounding the reaction centre is an array of pigment-protein complexes that function as an antenna to absorb sunlight and transfer the resulting electronic excitation efficiently to the reaction centre. These light-harvesting antenna are densely packed with pigments (chlorophylls and carotenoids) designed to absorb at many different colours throughout the solar spectrum. As is typical for photosynthetic organisms, 200–300 chlorophyll molecules act as light-harvesting antennae for each reaction centre. These chlorophyll molecules are susceptible to photodamage from photosensitized molecular oxygen, but they are protected by carotenoids (photoprotection). The carotenoids also act as light harvesters, absorbing radiation in the blue and green-orange where chlorophyll has little absorption, and transfer this electronic energy to chlorophyll for its eventual delivery to the reaction centre.

Learn More in these related Britannica articles:

  • Figure 2: A “best guess” reconstruction of the abundance of O2 in the Earth's atmosphere as a function of time. The O2-abundance axis is logarithmic.

    evolution of the atmosphere: Photochemical reactions

    Sunlight can provide the energy required to drive chemical reactions that consume some gases. Due to a rapid and efficient photochemical consumption of methane (CH4) and ammonia (NH3), a methane–ammonia atmosphere, for example, would have a maximum lifetime of about one million years.…

  • Figure 2: A “best guess” reconstruction of the abundance of O2 in the Earth's atmosphere as a function of time. The O2-abundance axis is logarithmic.

    evolution of the atmosphere: Photochemical production

    The strength of this source is limited by the requirement that water vapour rise in the atmosphere to altitudes at which solar ultraviolet radiation capable of cleaving water molecules has not yet been absorbed by other atmospheric constituents. The transport of water vapour…

  • Weeping willow (Salix babylonica).

    plant: Basic mechanisms

    The light reactions, the first stage of photosynthesis, convert light energy into chemical energy (ATP and NADPH). Light reactions comprise two interdependent systems, called photosystems I and II. The dark reactions, the second stage of photosynthesis, use the chemical energy products of the light reactions to…

  • Figure 1: Sequence of negative–positive process, from the photographing of the original scene to enlarged print (see text).

    technology of photography: The latent image

    The sensitive surface of ordinary film is a layer of gelatin carrying minute suspended silver halide crystals or grains (the emulsion)—typically silver bromide with some silver iodide. Exposure to light in a camera produces an invisible change yielding a latent image, distinguishable from unexposed silver halide…

  • Diagram of photosynthesis showing how water, light, and carbon dioxide are absorbed by a plant to produce oxygen, sugars, and more carbon dioxide.

    electromagnetic radiation: Ultraviolet radiation

    …light gives rise to certain photochemical reactions. This characteristic is exploited to produce cyanotype impressions on fabrics and for blueprinting design drawings. Here, the fabric or paper is treated with a mixture of chemicals that react upon exposure to ultraviolet light to form an insoluble blue compound. Electronic excitations caused…

More About Photochemical reaction

9 references found in Britannica articles

Assorted References

  • photographic process
  • ultraviolet radiation

atmosphere

  • early atmospheric reactions
  • Mars
  • nitric oxide

biological aspects

  • photoreception
  • photosynthesis





ШОКИРУЮЩИЕ НОВОСТИ



Related News


Pure white background photography
Wedding photographers in norwich
Passport photo id size
Funny photos of friends to tag on facebook
Make online photo gallery
Download cute baby photos for facebook